HIGH PERFORMING, COST EFFICIENT, INSHORE OR OFFSHORE
Panga Marine's Marquesas is similar to our 22' Boca Grande but without the molded interior liner.This makes the Marquesas totally customizable. It's solid as a rock in all conditions. Hand laid, knitted fiberglass fabric is used throughout. We foam fill underneath the floor, fiberglassing the foam so it cannot absorb water. The result is an absolutely unsinkable boat.
A 10-inch wide walkaround gunnel comes standard, as does ample forward storage. Only the highest quality marine grade stainless steel hardware is used. The Marquesas also features a baffled fuel cell that prevents fuel from shifting under acceleration, giving it constant fuel weight distribution and increased fuel gauge accuracy. And simply put, far less horsepower is needed to move the Marquesas than those of similar length because of its efficient hull design.
A 10-inch wide walkaround gunnel comes standard, as does ample forward storage. Only the highest quality marine grade stainless steel hardware is used. The Marquesas also features a baffled fuel cell that prevents fuel from shifting under acceleration, giving it constant fuel weight distribution and increased fuel gauge accuracy. And simply put, far less horsepower is needed to move the Marquesas than those of similar length because of its efficient hull design.
SPECIFICATIONS & STANDARD EQUIPMENT
LENGTH: 22’10”
BEAM: 7’
DRAFT: 8”
FUEL CAPACITY: 49 gallons
BEAM: 7’
DRAFT: 8”
FUEL CAPACITY: 49 gallons
MAXIMUM HP: 150
TRANSOM HEIGHT: 27'
HULL WEIGHT: 1,650 lbs.
TRANSOM HEIGHT: 27'
HULL WEIGHT: 1,650 lbs.
-
STRUCTURAL
- Highest quality workmanship
- Insulated bench seat w/4 rod holders
- Unsinkable close celled foam filled hull.
- 100% composite construction (No wood)
- Full interior liner molded to fit each hull.
- Center console
- 10” walk-around gunnels.
- Forward casting platform.
- High density composite transom integrated in hull through stringer system with unique external knees.
- Close cell foam under decks providing positive flotation encapsulated in fiberglass to prevent absorption.
- 100% Hand laid using biaxial knitted material throughout.
- Nida-core decks for superior strength and mounting ability.
- Nonskid surfaces on decks and cockpit sole.
- Mechanical steering.
- Heavy duty rub rail.
- 10 year structural hull warranty (transferable).
- Two tone color
-
ELECTRICAL
- Shark-eye navigation lighting.
- Heat-shrink sealed wire connections throughout.
- Every wire is marked and labeled for its use.
- Hand wired and meticulously organized under console.
- Dual batteries with switch
- SEATING
- Panga bait bench.
-
STORAGE
- Storage compartments and anchor locker.
-
HARDWARE
- Lenco trim tabs
- Hydraulic steering
- Ritchie compass
- Orcas Marine hardware used throughout.
- Flush hatch latches.
- All hardware flush mounted including hinges.
- 5 stainless pull-up cleats.
- Schmidt stainless 3 spoke steering wheel with knob.
- 4 stainless steel rod holders in gunnel.
- Stainless removable garboard boat drain in transom.
- Orcas welded plate bow and transom eyes for superior strength.
-
FUEL SYSTEM
- Moeller 49 gallon poly tank (under deck).
- Flush custom hull side fuel vent with water trap.
- Racor fuel filter with clear well and easy release plug.
- Stainless with white face fuel gauge - matches engine selection.
- Fire resistant fuel hose
-
PLUMBING
- Self bailing cockpit with 2 transom scuppers.
- Double clamped hoses with stainless.
- 750 GPH automatic bilge pump & float switch.
